Home  <  HM System <  HM Implant Components
D Ø2.5
2.5 4.0
10 HMN2510R03 HMN2510R04
13 HMN2513R03 HMN2513R04
15 HMN2515R03 HMN2515R04
D Ø3.0
2.5 4.0
10 HMN3510R03 HMN3510R04
13 HMN3513R03 HMN3513R04
15 HMN3515R03 HMN3515R04
  • ● A mini implant that is adequate for narrow space such as the mandibular anterior jaw
  • ● One-body implant with micro thread design enhances the distribution of masticatory force
  • ● RBM surface treatment enables fast osseointegration
  • ● Optimized shape and size of abutment enables cutting-free prosthetic work
  • ● Optimal design of body, thread, and drills to enhance initial bonding and bone penetration
  • ● Packing unit : HM Implant (Narrow ridge)
Code HMNIC40
  • ● Use for precise impression work
  • ● In case of non-modification of abutments : After taking an impression using an impression cap, make the prosthesis after creating a model using an analog
  • ● In case of modification: Take a direct impression.
  • ● Packing unit : Impression cap
Code HMNTC40
  • ● Use for making temporary prosthesis
  • ● One-touch locking design
  • ● Packing unit : Temporary Cap (Narrow Ridge)
Code HMNLA40
  • ● Make an HM Implant (Narrow Ridge) abutment of the oral cavity onto a working model
  • ● Packing unit : Lab Analog
D Ø2.5
2.0 4.0
10 HMD2510R02 HMD2510R04
13 HMD2513R02 HMD2513R04
15 HMD2514R02 HMD2514R04
D Ø3.0
2.0 4.0
10 HMD3010R02 HMD3010R04
13 HMD3013R02 HMD3013R04
15 HMD3014R02 HMD3014R04
  • ● Denture-type implants can be used in cases that edentulous patients have a narrow ridge width or if a regular implant is inappropriate.
  • ● One-body implant with micro thread design enhances the distribution of masticatory force
  • ● Easy and convenient denture work through the use of retainers and lab analogs
  • ● Ball-type structure for the connection of the O-ring attachment
  • ● Use by selecting 2/4mm depending on the gingival height
  • ● Packing unit : HM Implant (Denture)
Name Code
O-Ring
Retainer Cap Set		 ORNC
O-Ring
(For laboratory)		 ORNB
O-Ring
(Low retention)		 ORNL
O-Ring
(High retention)		 ORNH
  • ● Use for making stud-type overdenture
  • ● Use as an impression cap by connecting a black O-ring
  • ● O-ring components
    For lab use: Black color
    For denture: Yellow color (4N), orange color (6N)
  • ● Compensate the retention force through O-ring replacement
  • ● Packing unit : Retainer Cap+ O-rings
Code HMDLA35
  • ● Make an HM Implant (denture) abutment of the oral cavity on a working model
  • ● Packing unit : Lab Analog
Name D L Code
Ø1.5mm Lance Drill Ø1.5 35 HMLCDR15
Ø1.8mm Twist Drill Short Ø1.8 32 HMTD2C18S
Ø1.8mm Twist Drill Long Ø1.8 42 HMTD2C18L
Ø2.3mm Twist Drill Short Ø2.3 32 HMTD2C23S
Ø2.3mm Twist Drill Long Ø2.3 42 HMTD2C23L
  • ● Laser markings on lance drill corresponding to the implant length (8/10/13/15mm), drilling only the cortical bone is recommended; enables drilling up to the laser marking line depending on the surgeon's preference
Name D L Code
Torque Driver (Short) Ø3.4 16.5 HMTQDR34S
Torque Driver (Long) Ø3.4 21.5 HMTQDR34L
Machine Driver (Short) Ø3.4 24.4 HMMCDR34S
Machine Driver (Long) Ø3.4 29.4 HMMCDR34L
  • ● Special-purpose driver for HM Implant (Narrow Ridge) The triangle mark is used by aligning the driver with the implant cross section
Name D L Code
Torque Driver (Short) Ø3.8 13.5 HMTQDR38S
Torque Driver (Long) Ø3.8 18.5 HMTQDR38L
Machine Driver Ø3.84 21.4 HMMCDR38S
  • ● Special-purpose driver for HM Implant (Denture) The triangle mark is used by aligning the driver with the implant cross section
Name Code
Depth Gauge HMDTGG
  • ● For depth checking upon drilling
Name Code
Depth Gauge HMPRPN
  • ● The parallel pin is used for path checking upon drilling.
Name HMDRSP
  • ● In case a driver is stuck during implantation, the Driver Separator helps remove the driver based on the lever principle (inserting Driver Separator into the driver hole)
Name RCWC
  • ● Use for only fixture placement
  • ● Surgical tool for unlimited torque
    *Excessive torque may damage to fixture or bone
  • ● The arrow indicates rotational direction
Name HMTQHD
  • ● Use for manual torque after connecting to the connected part of a torque driver